Time Required : 2hr
Difficulty Level : Débutant/Beginner
- Flat aluminum wire 15cm
You need 5 strips of different lengths and strings like this:
A: 1 strip of 4 strings -> 4cm
B: 1 strip of 3 strings -> 7cm
C: 2 strips of 7 strings -> 1,5cm
D: 1 strip of 2 strings -> 2cm
Step 1 : The crane
1 : First cut the wings into the paper-band C and then the tail into the paper-band D.
2 : Take the paper-band B, then make a mark at 2cm in length. Wrap the paper in spiral up to the 2cm mark and then glue. Wait for the glue to dry.
3 : Take the spiral paper-band from the previous step and then cut the V-shaped head and finally fold.
Glue the wings and tail, wait until the glue dry.
Step 2 : The base
Take the aluminum wire and then give it the shape of an elongated oval, see photo. You can take a longer length and add spirals or other decoration.
Take the paper-band A, then wrap it all around the base, like a ring, see photo. Secure with glue.
Step 3 : Assembly
Take the crane and then glue it on the paper-band ring of the base. Et voilà c'est fini.